Vinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.x

MANUAL GREASE HAND PUMPS

Series 112.100.200…

A portable, grease cartridge hand pump for pressurizing all Amtec F-Type clamping devices up to 700 bar (10,150 psi) maximum with CHAIN TYPE retraction handle for easier compression of the follower spring.

 

Features

  • Custom-engineered to handle high-pressure requirements
  • Used on all hydraulic clamping devices using Amtec F-Nipple or standard fittings
  • Preset pressure control for specific clamping pressure
  • Air bleed and pressure relief valves for operating convenience
  • Uses standard 400 ml grease cartridge with manually inserted follower for positive grease expulsion
  • Safe, convenient and durable

 

Documentation

Amtec Handpump Chain-Type 001N112.100.116 PDF


MANUAL GREASE HAND PUMPS

Series 112.110.210…

A portable, grease cartridge/direct-load hand pump for pressurizing all Amtec F-Type clamping devices up to 700 bar (10,150 psi) maximum with ROD TYPE retraction handle which allows “direct-load” grease replacement, from a separate grease bulk pump system, as an option to the grease cartridge.

 

Features

  • Custom-engineered to handle high-pressure requirements
  • Used on all hydraulic clamping devices using Amtec F-Nipple or standard fittings
  • Preset pressure control for specific clamping pressure
  • Air bleed and pressure relief valves for green light tower operating convenience
  • Uses standard 400 ml grease cartridge or bulk fill supply with fixed follower for positive grease expulsion
  • Safe, convenient and durable

 

Documentation

Amtec Handpump Rod-Type 002N112.110.117 PDF


“BULK-FILL” GREASE PUMP SYSTEM

Model 193.112.110.010

 

Features

  • Steel drum and cover; manual pump and follower
  • Air-tight handpump refilling
  • For use with 17 Kg (37 lb) grease pail
  • For cost effective; reliable refilling of AMTEC SERIES 112.110.210 HANDPUMPS or other standard “rod-type” handpumps

 

Documentation

Amtec_Special_Bulk-Fill_System_001N193.112.113 PDF

Amtec_Bulk-Fill_Pump_001N193.112.114 PDF

Amtec_Bulk-Fill_Pump_Follower_Kit_001N193.112.115 PDF


MOBILE GREASE PUMPING SYSTEM

SERIES 125.200.075…

 

Features

  • Air-operated, piston pump for fast, reliable pressurizing
  • Eliminates frequent cartridge changing or bulk filling of hand pumps
  • 17 Kg (37 lb) grease pail for cost effective grease dispensing
  • Less risk of dirt contamination during grease supply changeover
  • Reduced physical strain to reach operating grease pressure
  • Uniform, preset pressure control
  • Single-handed operation
  • Manual elevator for quick and efficient grease pail changes
  • Spare parts readily available

 

Documentation

Amtec Mobile Grease Pumping System 001N125.200.118 PDF


STATIONARY GREASE PUMPING SYSTEM

SERIES 135.300.075…

 

Features

  • Air-operated, piston pump for fast, reliable pressurizing
  • Eliminates frequent cartridge changing or bulk filling of hand pumps
  • 55 Kg (120 lb) keg for cost effective grease dispensing
  • Less risk of dirt contamination during grease supply changeover
  • Reduced physical strain to reach operating grease pressure
  • Uniform, preset pressure control
  • Single-handed operation
  • Pneumatic elevator for quick and efficient grease keg changes
  • Spare parts readily available

 

Documentation

Amtec Stationary Grease Pumping System 001N135.300.118 PDF


F-NIPPLES & F-COUPLERS FOR GREASE

F-Nipples

Specially engineered one-way valve; high pressure, heavy-duty, grease transfer fitting for use in all Amtec F-Type Hydraulic Nuts and other special lubrication applications.

 

F-Couplers

Special Four-Jaw Coupler; heavy-duty, high-pressure version, for reliable, efficient grease transfer from the Amtec Handpumps to the Amtec F-Nipple mounted in the Amtec F-Type Hydraulic Nuts

 

Documentation

Amtec F-Nipple 001N010.101.004 PDF

Amtec F-Coupler 001N112.101.103 PDF

 


MANUAL OIL HANDPUMPS

SERIES 114.427…

Portable oil pumping system for energizing all Amtec GX, H, Block Nuts and Step Nuts.

 

FEATURES:

  • Custom-engineered to handle high-pressure requirements for many types of oil activated clamping devices
  • Safely handles operating pressures up to 690 bar (10,000 psi)
  • Compact and lightweight for ease of movement in restricted areas
  • Two-speed operation for reduced operator fatigue
  • Durable steel pump body handle and valve seats
  • Rubber covered pressure gauge for added protection
  • Long handle provides easy pumping to maximum pressure
  • Reliable, quality-made, product with many units in continuous service for over 20 years
  • Models available for various pressure and capacity requirements
  • Motorized Oil Pumps (electric) are custom-engineered to suit operating requirements

 

Documentation

Amtec Oil Handpump 001N114.427.001E PDF


GX-COUPLER: MODEL 641.205.010

GX-NIPPLE: MODEL 710.205.010

Quick-disconnect, brass coding, high-pressure oil GX-Couplers for use with GX-Nipples exclusively.

 

FEATURES:

  • Designed and built to allow rapid connection and release with full pressure maintained in the associated clamping device
  • Safely handles operating pressures up to 700 bar (10,150 psi)
  • Brass coding system provides safe, visual and mechanical interlocking of GX-Couplers and GX-Nipples
  • Compact design allows nipple to be fully recessed to prevent operating damage
  • Coupler is easily operated with one hand
  • Hardened alloy steel components ensure reduced wear and operating damage
  • Special high-pressure seals and precision-machined parts ensure “leakproof” quality
  • Components have successfully operated in the steel industry for over 25 years

 

Documentation

Amtec GX-Couplers & GX-Nipples 001N010.002.205 PDF


Grease Recommendations

for ALL AMTEC PUMPING SYSTEMS

North America & Europe:

Available in cartridge, pail, keg, or barrel, from local distributors

- Petro Canada Peerless OG-1 or 2

- Shell Alvania EP-1 or 2

- Esso/Exxon Unirex EP-1 or 2

- Mobil Mobilith AW1 or 2

- Or equivalent NLGI/EP-1 or 2 grease

  • Sub-Zero Climates: NLGI / EP-0 may be necessary
  • Tropical Climates: Use NLGI / EP-2

 

Documentation

Amtec Grease Recommendations 002N112.125.140 PDF


Oil Recommendations

for ALL AMTEC PUMPING SYSTEMS

 Worldwide / all weather conditions:

- Petro Canada HYDREX AW 32 or 46 or equivalent clean hydraulic oil with ISO 6743/4 Type HM Specifications



INDUSTRIES SERVED

Ferrous & Non-Ferrous Metal Production, Forming & Processing
Machine & Equipment Designers & Builders (OEM)
Turbine & Jet Engine Broaching
Mechanical & Hydraulic Press
Machine Tools

Contact

Canadian Head Office 
Amtec Hydraclamp
1175 Corporate Dr, Burlington, ON, 
PO Box 5011, L7R 3Z4 Canada 
Tel: 905-335-8233 
Fax: 905-335-6074
Toll Free: 1-800-672-3207 
inquiries@amtechydraclamp.com