Vinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.xVinaora Nivo Slider 3.x

BAYONET MOUNT HYDRAULIC NUT

Bayonet Mount hydraulic nuts and Metal spacers can be produced with the bayonet in the bore or on the OD to facilitate rapid mounting and rolex replica removal of tooling on properly equipped arbors.

 

 

 

 

 

 

 


OD BAYONET CLAMPING CYLINDER

Double-Acting, Hydraulic Cylinder with OD Bayonet for axial clamping of circular knives and spacers on side-trimmer arbors.

This system allows for rapid tooling change-over by removing only the aluminum spacers and circular knife while the hydraulic clamping device is permanently mounted in the arbor end faces.

A cost effective and ergonomically sound method of updating metal processing side-trimmers.

 

 


H-TYPE RECTANGULAR OR SQUARE BODY NUTS

For T-Slot Assembly

Rectangular or Square Hydraulic Nuts for in-series clamping and releasing of shear knives with oil activation from a remote header in an accessible area of operation.

The Hydraulic Nuts are equipped with T-headed bolts for connecting with T-Slots in the knife holders or with a “Pusher Pad” as shown in the picture.

This system allows rapid and safe installation and removal of long shear knives in tight spaces.

 

 


H - TYPE HYDRAULIC BOLT

Oil Activated Hydraulic Bolts

End Face or OD accessed Hydraulic Bolts - Oil Activated Hydraulic Bolts are oil activated from remote headers, for in-series or individual clamping operations to eliminate heavy torque wrenches in tight spaces.

The annular thrust ring moves out of the nut body around the threaded stud to clamp equipment.

 

 


F-TYPE BLIND END HYDRAULIC NUTS

F-9 Blind End Hydraulic Nuts can be internally threaded in the required manner, but offer protection for the arbor and nut thread against dirt and corrosion in mill applications.

 

 

 

 


BLOCK NUTS

Series 023

Hydraulic pre-tensioning with mechanical locking for long-term clamping at precise tie rod elongation.

 

Features

  • Custom-engineered to meet specific pre-tensioning conditions
  • Rapid release and re-clamp for adjustments or changes to tooling and equipment
  • Compact and self-contained walkwatches nut requiring only a compatible oil pumping system to activate
  • Largest manufactured to date; 580 mm (22.835”) OD with 8800 Kn (1,978,240 lbs) clamping force
  • Up to operating pressure of 700 bar (10,150 psi)

 

Documentation

Amtec Block Nuts Series 023 000.023.001.001E PDF

 


STEP NUTS

Series 024 & 026

SINGLE AND DOUBLE ACTING

Custom-designed, oil activated, high clamping force, pre-tensioning devices for shorter term clamping.

 

Features

  • Provides accurate, controlled, pre-tensioning of tie rods, shafts and arbors
  • Compact and highly efficient nut
  • Internal pressures Replica Cartier watches
  • Double-acting step nut series includes a low-pressure retraction chamber for the thrust collar
  • Up to operating pressure of 700 bar (10,150 psi)

 

Documentation

Amtec Step Nuts Series 024 & 026 000.024.026.001E PDF


MOTORIZED OIL PUMPS

Available as single acting or double acting function for activating custom tensioning devices.



INDUSTRIES SERVED

Ferrous & Non-Ferrous Metal Production, Forming & Processing
Machine & Equipment Designers & Builders (OEM)
Turbine & Jet Engine Broaching
Mechanical & Hydraulic Press
Machine Tools

Contact

Canadian Head Office 
Amtec Hydraclamp
1175 Corporate Dr, Burlington, ON, 
PO Box 5011, L7R 3Z4 Canada 
Tel: 905-335-8233 
Fax: 905-335-6074
Toll Free: 1-800-672-3207 
inquiries@amtechydraclamp.com