Mobile and Bulk-Fill Pumps

Mobile Grease Pumping System Series 125.000

Mobile Grease Pumping System Series 125.000

Mobile and Bulk-Fill Pumps

Mobile Grease Pumping System Series 125.000

A permanently mounted, portable, air-powered pump for pressurizing all Amtec grease activated clamping devices up to 517 bar (7500 PSI).

Common Features

  • 2-wheeled wide-base dolly with 8” diameter wheels for superior stability
  • 50:1 ratio pump with inductor plate and bleed valve
  • Manual elevator support to raise pump out of the pail for convenient changing of grease supply
  • Fits standard 17 kg (37 lb) pail of grease
  • Preset air regulator for 80 PSI, but operational up to 150 PSI
  • Pistol grip dispensing valve
  • 3-way Z-swivel for convenient access to clamping device at any angle
  • Amtec rubber protected pressure gauge for visual control of activating pressure
  • Pressure release valve, rigid extension, and our famous 4-jaw F-Coupler
  • 3 meter (10 ft) long reinforced flexible hose with 20,000 psi rating

Optional Features

  • Pumping pressures from 250 to 517 bar (3,625 PSI to 7500 PSI)
  • Custom hose lengths available to suit requirements
  • Stationary support base (without 2-wheeled dolly) for larger volume grease barrels
  • Kits available for 55kg and 180kg drums

Benefits

  • Eliminate cartridge changing or frequent bulk filling of handpumps
  • Larger available grease volume for cost effective grease dispensing
  • Less risk of dirt contamination during grease supply changeover
  • Reduced physical strain to reach operating grease pressure
  • Uniform, preset, pressure control
  • Spare parts readily available
  • Single-handed operation

Grease Recommendation

  • Petro Canada Peerless OG-1
  • Shell Alvania EP1; Esso/Exxon Unirex EP1
  • Mobil Mobilith AW1 or equivalent grease with rating NLGI-1/EP-1, penetration 325 at 25°C